chipsiop.blogg.se - Turnigy plush 80a esc manual

Turnigy plush 80a esc manual manual#
Turnigy plush 80a esc manual software#
Turnigy plush 80a esc manual series#

Otherwise, it will reduce the useful life of the motor and ESC. Don’t operate continually when the motor was blocked.

Always keep all the things away from the propeller when working on a power system with the battery connected.

Please don’t let ESC overvoltage for a long time, otherwise will short the usage life of ESC.

Please don’t operate long time when the ESC is over-temperature, otherwise, it will damage the MOS FET easily.

It will reduce the battery usage life and ESC working efficiency.

Please don’t operate for a long time with the battery under voltage.

Please strictly follow the instructions to DETAILS SETTINGS WITH PROGRAMMING CARDĭue to the brushless power system is powerful, improper use may cause personal injury and device damage. For example, using a 4s battery, beeps will be: “ “. Power on the controller and set the throttle stick to the Min throttle position (if higher than1800us, it will get into throttle calibration).Ĭonnect ESC as connection diagram, power on ESC, ESC will automatically detect the battery cells and using beeps to indicate the cells number. Set the throttle stick at middle-> Power on ESC->A sequence beeps and then follow with single and repeat DD-, means now it’s in controller brake setting procedure -> move the throttle stick to Max throttle position (means Brake is ON), or move the throttle stick to Min throttle position (means Brake is OFF)->a sequence beeps means setting ok and followed 2 beeps “means ESC is ready to go.

Setting (Brake ON/Brake OFF) by the controller.

Move the throttle stick to the lowest position, motor beeps “ means the low position is set, then another “ “” as confirmation that throttle is set ok and ready to go. Power on the ESC, motor beeps “, means high position throttle is set. Step 1: Power on the controller and move the throttle stick to the highest position. Please set the throttle range when you first time to use the ESC.

It supports the setting of the direction of motor rotation by prog-card.

60A and above supports adjustable temperature protection.

Customized settings can be done with prog-card and controller (Brake/Non-Brake).

The regular throttle range is 900us-2400us.

Different PWM frequencies can be set by a programming card.

PWM output frequency range is 8-32KHz.

Support 6A-150A, 2-8S (Please check ESC sticker to verify the specified cells and power, more high voltage model to be added).

Turnigy plush 80a esc manual software#

Easy to program with prog-card, designed for fixed-wing, software with completely independent intellectual property rights, can be continuously upgraded.Good compatibility with motors, suitable for most motors on the market.The throttle valve can be used to set up to be compatible with different controllers. Automatically detect the input signal.Compared with other conventional ESCs, synchronous rectification, regenerative braking, and more energy saving.Throttle signal loss protection is achieved. High resolution, smooth and sensitive throttle linearity.32-bit ARM MCU, small size, lightweight, and fast response.For the latest specifications, please visit the webWebsite: LEISTUNGSMERKMALE: We do not assume responsibility for any losses caused by unauthorized modifications to our product.

Turnigy plush 80a esc manual manual#

We strongly recommend you read through this user manual before use.īecause we have no control over the use, installation, or maintenance of this product, no liability may be assumed for any damage or losses resulting from the use of the product. Any improper use may cause personal injury and damage to the product and related devices. The programming card is an excellent item as it instantly tells the user the current settings and with a few simple clicks of the buttons, the user can change the settings and have graphical reassurance of those changes.Thank you for purchasing Plush-32 ESC product!īrush-less power systems can be very dangerous. User Programmable, both via controller and optional programming card.

We are certain you will find these to be the best B ESC available from Asia. These speed controllers are sold in western countries under various names at triple the price. We guarentee these are the best Brushless Speed Controllers you can purchase at this price. Our TURNIGY speed controllers come with a 14 month warranty. They have a broad range of programming features and a smooth throttle response compared to other B ESCs in the same price range.

Turnigy plush 80a esc manual series#

The Plush series ESC are a very good quality controller.